|
|
|
|
| Image |
Part Number |
RoHS |
Search Distributor Inventory |
|
ABLJO
Features:
• High "Q", 3rd Overtone Crystal Technology
• Ultra Low Jitter performance 0.10 ps Max. (12kHz to 20MHz)
• Standard LVCMOS RF Output
• Wide Operating Temperature (-40ºC to +85ºC) standard
• ±40 ppm Max. All inclusive Stability (including Aging) over 10-years
• (17) Standard Frequencies between 80MHz & 200MHz
• 9x14mm RoHS Compliant SMT package
Applications:
• Avionics
• COTS - Military communications
• Low Phase Noise Signal Sources
• High Definition TV
• Test & Measurement
• Ultra Low Jitter RF Communication Circuitry |
|
|

|
| Engineered Solutions |
| Image |
Part Number |
RoHS |
Search Distributor Inventory |
|
SYNC-10.00MHz
Features:
• Stand Alone 10.00MHz Portable Precision Frequency Reference
- World Wide Capability
• Built-in Stratum-III stability, 10.00MHz Signal tuned into 50Ω's • Synchronization circuitry providing dynamic sync capability, enabling Calibration
to a known source such as; a GPS Tracked 10.00MHz reference/10.00MHz
Rubidium Source/10.00MHz OCXO based reference
• Integrated re-chargeable batteries to provide true stand-alone capability in the field
• Once sync'd; guaranteed ±300 ppb stability over 0ºC to 60ºC
• Pocket Size - 3.50" * 1.50" * 1.00"; machined aluminum durable enclosure
• Accompanied with a Universal AC-DC Charger
•Continuously operable at full charge for 10-hours
Applications:
• Ideally suited as an in-field Calibrated Precision 10.00MHz reference
for trouble shooting or tuning hardware and Base Station related
equipment
• Reference source for lab use
• Reference source to drive frequency counters and other timing related
hardware or instruments
• Precision Portable reference for inspection of in-field wireless
transmitters
|
|
|
 |
|
ABCDM-XX-YYYMHz
Features:
• Non PLL based high frequency compact reference - Optimized for Jitter and Phase Noise
• 8-differential outputs to facilitate multiple clocking needs
• All outputs derived from the same low noise crystal oscillator - making all outputs
frequency coherent
• 0.50 ps max. rms jitter over 12kHz to 20MHz Bandwidth
• Ultra fast rise & fall times satisfying demanding needs
• ±50 ppm All Inclusive Frequency Stability over 10-years (no adjustment needed)
• Metal shield reducing any EMI related concerns
• Compact Size, 9*14*2 mm solution saving board space in high density designs
Applications:
• SERDES, PCIE and SATA
• Gigabit Transceivers
• Telecom Switching
• Fiber Distributed Data Interface
• Ethernet, Gigabit Ethernet
• Storage Area Network (SAN)
• Broadband Access
• SONET/SDH/DWDM
• Infiniband |
|
|
 |
|
ABBTM-2.4GHz-T
• Bluetooth Spec v2.0+EDR Compliant
• Class 2, up to 10-meter range
• Complete 2.4GHz Bluetooth® System
• Power management: low power 1.8V operation for Bluetooth® core
• Compact size: 26.9mm (L) x 13 (W) mm x 2.2mm (H)
• Bluetooth® Profile Supported: SPP,HSP, HFP, OPP,PBAP
• Internal antenna
• On-board flash memory (8Mbits)
• Supports multiple connections
• Surface mount module for embedded applications
• Several firmware options
• Rewritable flash memory for easy upgrade route
• Custom firmware production available
Applications:
• Hand-held devices
• Printers
• Personal Navigation Devices
• PDAs and other portable terminals
• MP3 headset |
|
|

|
| Power Supply Modules |
| Image |
Part Number |
RoHS |
Search Distributor Inventory |
|
ABPSM-ULN-A
Features:
• AC Adapter Input Voltage 100VAC to240VAC; 50Hz and 60Hz cycles
– World Wide Capability
• Four DC Output Ports, 1.8V, 2.5V 3.3V & 5.0V
• Current Sourcing Capability 200mA max each port
• Exceptional low noise density; < 7nV / √Hz @ 1kHz offset Typical
• Better than 0.30µVrms over 0.1Hz to 1kHz bandwidth (best-in-class)
• Convenient, Ultra Low Noise Solution offering most common bias levels
• Portable - Small form factor [3.50" * 1.50" * 0.65"] Machined Aluminum enclosure
• No external heat sinking is required
• Low Cost
Applications:
• Lab Grade Power Supply designed to replace bulky & noisy power
supplies for everyday use
• A must have for Noise Sensitive Measurements such as, S/N ratio,
Spectral Purity, Jitter, Phase Noise & Harmonic Distortion
• Ideal for testing circuits including:
- Audio - Medical Diagnostic
- RF - Jitter Sensitive Digital
- Microwave
|
|
|