10Mhz Precision Ref. | Ultra Low Noise Power Supply | In-Circuit Board Characterization Service

10MHz Precision Ref.
Image	Part Number	RoHS	Search Distributor Inventory
	SYNC-10.00MHz Features: • Stand Alone 10.00MHz Portable Precision Frequency Reference- World Wide Capability • Built-in Stratum-III stability, 10.00MHz Signal tuned into 50Ω's • Synchronization circuitry providing dynamic sync capability, enabling Calibration to a known source such as; a GPS Tracked 10.00MHz  reference/10.00MHz Rubidium Source/10.00MHz OCXO based reference • Integrated re-chargeable batteries to  provide true stand-alone capability in the field • Once sync'd; guaranteed ±300 ppb stability over 0ºC to 60ºC • Pocket Size - 3.50" * 1.50" * 1.00";  machined aluminum durable enclosure • Accompanied with a Universal AC-DC Charger • Continuously operable at full charge  for 10-hours Applications: • Ideally suited as an in-field Calibrated  Precision 10.00MHz reference  for  trouble shooting or tuning  hardware and Base Station related  equipment • Reference source for lab use • Reference source to drive frequency  counters and other timing related  hardware or instruments • Precision Portable reference for  inspection of in-field wireless  transmitters
Power Supply Modules
Image	Part Number	RoHS	Search Distributor Inventory
Ultra Low Noise Power Supply
	ABPSM-ULN-A Features: • AC Adapter Input Voltage 100VAC to  240VAC; 50Hz and 60Hz cycles – World Wide Capability • Four DC Output Ports, 1.8V, 2.5V  3.3V & 5.0V • Current Sourcing Capability 200mA max each port • Exceptional low noise density; < 7nV /  √Hz @ 1kHz offset Typical • Better than 0.30µVrms over 0.1Hz to  1kHz bandwidth (best-in-class) • Convenient, Ultra Low Noise Solution  offering most common bias levels • Portable - Small form factor [3.50" * 1.50" * 0.65"] Machined Aluminum  enclosure • No external heat sinking is required • Low Cost Applications: • Lab Grade Power Supply designed to   replace bulky & noisy power  supplies for everyday use • A must have for Noise Sensitive   Measurements such as, S/N ratio,   Spectral Purity, Jitter, Phase Noise & Harmonic Distortion • Ideal for testing circuits including: - Audio - Medical Diagnostic - RF - Jitter Sensitive Digital - Microwave