Helpful Information

APxS Comparison to Conventional Programmable Oscillators

- Conventional not commonly recommended for mass production usage
   . APxS suitable for ongoing mass production usage due to higher performance

- Conventional up to 125MHz at 3.3V, 150MHz at 5.0V
   . APxS up to 200MHz over 2.25V to 3.63V range

- Conventional Peak to Peak Jitter typical 50-90pS and 250pS Max.
   . APxS Peak to Peak Jitter typical 30-70pS

- Conventional Duty Cycle 40-60%
   . APxS Duty Cycle 45-55%

- Conventional Rise Fall time 2.4nS ~ 4nS
   . APxS 1.5nS Max (High Drive Mode) 10%/90% VDD

- Conventional 3x2mm smallest package size available
   . APxS available down to 2.5x2.0mm

- Conventional offers Limited Voltage Options depending on Package Size
   . APxS available 1.8V, 2.5V, and 3.3V in AP2S & AP3S packages

 

APxS Series Products and Ordering Options

The new APxS series Low Jitter Programmable Oscillators up to 200MHz are ideal for a wide range of applications from quick turn engineering prototypes to mass production quantities. The APxS series can be substituted for fixed frequency Oscillators. If jitter noise has caused you to hesitate using programmable oscillators in the past, try the new Abracon AP2S, AP3S, AP5S, or AP7S series for jitter performance that is comparable to longer lead time fixed frequency oscillators. You no longer need to wait weeks for those custom frequency Oscillators!


APxS Series
 Image Part name
 RoHS
Search
Distributor
Inventory
Buy
Online
AP2S
AP2S 2.5 x 2.0 x 0.9mm
3.3 - 1.8Vdc, Programmable . 1MHz -110MHz
. Peak to Peak Jitter 70psec Typical
. 10MHz to 200MHz; 3.3V CMOS Output
. 10MHz to 166MHz; 2.5V CMOS Output
. 10MHz to 133MHz; 1.8V CMOS Output



Stocking Distributors with In-House Programming Capabilities of APxS Blanks for Quick Turn Delivery!
AP3S
AP3S 3.2 x 2.5 x 1.1mm
3.3 - 1.8Vdc, Programmable . .8MHz -110MHz
. Peak to Peak Jitter 70psec Typical
. 10MHz to 200MHz; 3.3V CMOS Output
. 10MHz to 166MHz; 2.5V CMOS Output
. 10MHz to 133MHz; 1.8V CMOS Output



Stocking Distributors with In-House Programming Capabilities of APxS Blanks for Quick Turn Delivery!
AP5S
AP5S 5.0 x 3.2 x 1.1mm
3.3 - 2.5Vdc, Programmable . 10MHz - 200MHz
. 10MHz to 200MHz CMOS Output
. Peak to Peak Jitter 50psec Typical
   



Stocking Distributors with In-House Programming Capabilities of APxS Blanks for Quick Turn Delivery!
AP7S
AP7S 7.0 x 5.0 x 1.5mm
3.3 or 2.5 Vdc, Programmable . 10MHz - 200MHz
. 10MHz to 200MHz CMOS Output
. Peak to Peak Jitter 50psec Typical
   



Stocking Distributors with In-House Programming Capabilities of APxS Blanks for Quick Turn Delivery!
 
Typical Jitter Performance
High Performance APxS Programmable Crystal Oscillators Pk-Pk Jitter Typically just 30pS ~ 70pS.
* APxS Series are suitable for many High Frequency Applications
Output (MHz) 100 77.76 123.6 155.52 200
Pk-Pk Jitter 30.2 47.7 37.5 48.1 32.9


Abracon Corporation. 30332 Esperanza, Rancho Santa Margarita, CA 92688 \ Ph.949.546.8000 \ Fx.949.546.8001
Copyright 2005© Abracon Corporation. All rights reserved.
Terms and Conditions of Sale